14.7.2
Fixed castor - mounting plate - solid rubber tyre on plastic rim
Product information
- Fixed castors with a standard solid rubber tyre on a steel rim are available in wheel diameters from Ø80mm to Ø250mm inclusive
- Pressed fork with a flat mounting face, made from galvanised steel sheet
- Maximum static load capacity from 50kg to 260kg inclusive
- Pressed rim made from galvanised steel sheet with steel hub sleeve
- Hub sleeve with roller bearing
- Standard solid rubber tyre, hardness 80° Shore A ±3°
- Temperature resistance: -20 °C to +80 °C
- The black tyre can leave marks on the floor
- Highly resistant to many aggressive chemicals; not resistant to oil an grease
- Low-noise, gentle on floor surfaces and maintenance-free under conditions of normal use
- For general use indoors and on surfaced areas outdoors
Material & colour
- Fork: Galvanised steel - zinc-coloured
- Tyre: solid rubber - black
- Rim with hub: galvanised steel – zinc-coloured
- Roller bearing: steel
Bearing types
Type B: Wheel with roller bearing (lubricated with grease)
Legend
B=mounting plate width, b=tread width, B1=dimension between hole centres, D=wheel Ø, d=hole Ø, H=total height, K= maximum static load capacity in kg, L=mounting plate length, L1=dimension between hole centres, Type=type of wheel bearing
