Crank handle aluminium – DIN 468 / DIN 469

Product information

Aluminium crank handles are available in version DIN 468 (cranked) with centre distances from 80mm up to 160mm and DIN 469 (straight) with 80mm and 200mm
Available with square bore from 10mm up to 19mm or with round bore Ø20mm
Threaded end M8 or M10 for mounting a handle
Suitable for manual adjustment of spindles, shafts and valves on machines and installations

Material: Al (aluminium), polished
Colour: aluminium

Make your selection below

Legend
L=centre distance, H=total height, M=thread size for handle, SW=square hole size, Bore=round hole size, DIN=DIN model

Filter by

Show all filters

Articles

1 pages - 1

Article	Description	H	h	h1	D	d	L	M	SW	DIN	Bore	Colour/RAL
200100.080120809.002	Crank handle aluminium DIN 468 cranked - length 80mm - hub Ø24mm - square bore 12mm - revolving handle M8 - Polished	38	28	24	80	24	80	M 8	SW 12	DIN 468		Aluminium
200100.100120809.002	Crank handle aluminium DIN 468 cranked - length 100mm - hub Ø28mm - square bore 12mm - revolving handle M8 - Polished	48	33	28	100	28	100	M 8	SW 12	DIN 468		Aluminium
200100.125200806.002	Crank handle aluminium DIN 468 cranked - length 125mm - hub Ø34mm - bore Ø20mm - revolving handle M8 - Polished	55	39	34	125	34	125	M 8		DIN 468	20	Aluminium
200100.160201006.002	Crank handle aluminium DIN 468 cranked - length 160mm - hub Ø38mm - bore Ø20mm - revolving handle M10 - Polished	65	44	38	160	38	160	M10		DIN 468	20	Aluminium
200110.080100809.002	Crank handle aluminium DIN 469 straight - length 80mm - hub Ø24mm - square bore 10mm - revolving handle M8 - Polished	24	24	0	80	24	80	M 8	SW 10	DIN 469		Aluminium

1 pages - 1