Square end cap inserts - thin head - finishing plug

Product information

Ribbed inserts with a thin head for square tubes are available for tube sizes from 20x20mm to 140x140mm and for wall thicknesses from 0.8mm to 6.0mm
Thin head, approximately 50% thinner than standard ribbed inserts
Not suitable as a foot plug or glide due to the thin head and limited wear layer
Suitable as a finishing plug for a clean and subtle finish on square tube profiles, including furniture and tubular constructions

Material: PE (polyethylene)
Colour: black, white or grey

Make your selection below

Legend
D=head size, d=shaft size, d1=ribbing size, h=head height, L=shaft height, Version=tube wall thickness, Tube size=external tube size

Filter by

Show all filters

Articles

1 pages - 1

Article	Description	Tube size	D	Version	L	d	d1	h	Colour/RAL
6172020 Z	Insert for square tubes - thin head PE 20x20mm - 0.8-3.0mm - Black	20x20	20	0,8-3,0	11,5			2	RAL 9005 - Jet black
6172525 Z	Insert for square tubes - thin head PE 25x25mm - 0.8-2.5mm - Black	25x25	25	0,8-2,5	11,5			2	RAL 9005 - Jet black
6173030 Z	Insert for square tubes - thin head PE 30x30mm - 1.0-2.5mm - Black	30x30	30	1,0-2,5	11,5	19	25	2	RAL 9005 - Jet black
6173535 Z	Insert for square tubes - thin head PE 35x35mm - 0.8-2.5mm - Black	35x35	35	0,8-2,5	14,5			2	RAL 9005 - Jet black
6174040 Z	Insert for square tubes - thin head PE 40x40mm - 1.0-2.5mm - Black	40x40	40	1,0-2,5	14,5			2	RAL 9005 - Jet black
6174545 Z	Insert for square tubes - thin head PE 45x45mm - 1.0-2.5mm - Black	45x45	45	1,0-2,5	14,5			2	RAL 9005 - Jet black
6175050 Z	Insert for square tubes - thin head PE 50x50mm - 1.0-2.5mm - Black	50x50	50	1,0-2,5	14,5			2	RAL 9005 - Jet black
6271414 Z	Insert for square tubes - thin head PE 140x140mm - 4.0-6.0mm - Black	140x140	140	4,0-6,0	35	0	0	3	RAL 9005 - Jet black

1 pages - 1