ProductsKnobs, handwheels, handles and gripsBall knobsBall knob ABS – DIN 319 – tapped or reamed blind hole

Ball knob ABS – DIN 319 – tapped or reamed blind hole

Ball knob ABS – DIN 319 – tapped or reamed blind holedrawing_1

Ball knob ABS – DIN 319 – tapped or reamed blind holedrawing_2

Product information

ABS ball knobs with a tapped blind hole are available in knob diameters from Ø 20 mm to Ø 40 mm inclusive
Plastic thread from M5 to M12 inclusive
Reamed holes for an interference fit in Ø 3.5 mm to Ø 12 mm inclusive
Similar to DIN 319, form C or form K
Hollow design, closed with a pre-fitted cap on the threaded side
Lightweight, hard and impact-resistant, even at low temperatures
Suitable for temperatures from -35°C to 85°C
Often used as an end knob on control levers, handles and locking pins for machines, vehicles or furniture.

Material: ABS (acrylonitrile butadiene styrene)
Colour: gloss black

Models
Type C: Tapped blind hole – form C
Type K: Reamed hole for interference fit – form K

Make your selection below

Legend
D=Ø-Knob, d1=Ø-Blind hole, H=Height, M=Thread, Type=model, t=depth

Filter by

Show all filters

Show less filters

Reset all filters

Articles

1 pages - 1

Article	Description	M	d	D	H	t	DIN	MOQ
87061611 Z	Ball knob ABS 20mm with bore 6mm		6	20	18	15,5	DIN 319 K
87061612 Z	Ball knob ABS 20mm with bore 8mm		8	20	18	15,5	DIN 319 K
87061615 Z	Ball knob ABS 20mm with bore 10mm		10	20	18	15,5	DIN 319 K
87061625 Z	Ball knob ABS 20mm with bore 5mm		5	20	18	15,5	DIN 319 K
87061626 Z	Ball knob ABS 20mm M5	M 5		20	18	15,5	DIN 319 C
87061613 Z	Ball knob ABS 20mm M6	M 6		20	18	15,5	DIN 319 C
87061614 Z	Ball knob ABS 20mm M8	M 8		20	18	15,5	DIN 319 C
87061616 Z	Ball knob ABS 20mm M10	M10		20	18	15,5	DIN 319 C
87061600 Z	Ball knob ABS 25mm with bore 8mm		8	25	22,5	20	DIN 319 K
87061617 Z	Ball knob ABS 25mm with bore 10mm		10	25	22,5	20	DIN 319 K
87061601 Z	Ball knob ABS 25mm M6	M 6		25	22,5	20	DIN 319 C
87061618 Z	Ball knob ABS 25mm M10	M10		25	22,5	20	DIN 319 C
87061603 Z	Ball knob ABS 32mm with bore 6mm		6	32	29	26,5	DIN 319 K
87061604 Z	Ball knob ABS 32mm with bore 8mm		8	32	29	26,5	DIN 319 K
87061619 Z	Ball knob ABS 32mm with bore 10mm		10	32	29	26,5	DIN 319 K
87061627 Z	Ball knob ABS 32mm with bore 5mm		5	32	29	26,5	DIN 319 K
87061629 Z	Ball knob ABS 32mm with bore 12mm		12	32	29	26,5	DIN 319 K	4000
87061628 Z	Ball knob ABS 32mm M5	M 5		32	29	26,5	DIN 319 C
87061605 Z	Ball knob ABS 32mm M6	M 6		32	29	26,5	DIN 319 C
87061606 Z	Ball knob ABS 32mm M8	M 8		32	29	26,5	DIN 319 C
87061620 Z	Ball knob ABS 32mm M10	M10		32	29	26,5	DIN 319 C
87061630 Z	Ball knob ABS 32mm M12	M12		32	29	26,5	DIN 319 C
87061607 Z	Ball knob ABS 40mm with bore 8mm		8	40	37	34,5	DIN 319 K
87061608 Z	Ball knob ABS 40mm with bore 10mm		10	40	37	34,5	DIN 319 K
87061621 Z	Ball knob ABS 40mm with bore 6mm		6	40	37	34,5	DIN 319 K
87061631 Z	Ball knob ABS 40mm with bore 5mm		5	40	37	34,5	DIN 319 - K
87061632 Z	Ball knob ABS 40mm with bore 12mm		12	40	37	34,5	DIN 319 K
87061610 Z	Ball knob ABS 40mm M10	M10		40	37	34,5	DIN 319 C
87061633 Z	Ball knob ABS 40mm M12	M12		40	37	34,5	DIN 319 C

1 pages - 1

Ball knob ABS – DIN 319 – tapped or reamed blind hole

VERPAS B.V.

ABOUT VERPAS

SERVICE

ORDER INFORMATION