Anti-loss washer tapered

Product information

Plastic anti-loss washer with taper on one side are available for thread sizes: Metric M3.5 to M10, Withworth R 1/8” to R ½” or for other threads with diameters from Ø3.5 to Ø4.8mm inclusive
Simple and fast (preliminary) assembly by pressing the washer over the thread
The taper grabs firmly into the pitch of the thread and thus securing the screw connection, even in the event of vibrations
Removing the anti-loss ring is only possible by unscrewing manually
Seals against moisture
Anti-loss washer or retaining washers are used for mounting screws and bolts in situations where the screw must not fall out of an object, such as mounting brackets or inspection or service hatches in hard-to-reach places

Material: PA (Polyamide)
Colour: natural

Available on request:

Legend
D=outer-Ø, d=hole-Ø, H=overall height, h=washer height, M=Compatible thread sizes

Filter by

Show all filters

Articles

1 pages - 1

Article	Description	d	M	D	H	h	BSP
88.N04000.01	Anti-loss washer, tapered one side - PA natural - M 4	4,1	M 4	9	3	1,6
88.N04200.01	Anti-loss washer, tapered one side - PA natural - M 4	4,2	M 4	9	3	1,3
88.N03500.01	Anti-loss washer, tapered one side - PA natural - M 3,5	3,6	M 3,5	9,1	2,7	1,2
88.N05000.01	Anti-loss washer, tapered one side - PA natural - M 5	5	M 5	10,1	3,1	1,6
88.N06000.01	Anti-loss washer, tapered one side - PA natural - M 6	6,3	M 6	12,5	2,7	1,3
88.N000108.01	Anti-loss washer, tapered one side - PA natural - R 1/8”	10,5	M10	15	4,3	2,1	1/8"
88.N08000.01	Anti-loss washer, tapered one side - PA natural - M 8	8,2	M 8	16,2	3,5	1,6
88.N000104.01	Anti-loss washer, tapered one side - PA natural - R 1/4”	13,2	M12	18,9	4,5	2,6	1/4"
88.N000308.01	Anti-loss washer, tapered one side - PA natural - R 3/8”	17,7	M16	23	4,5	2,1	3/8"
88.N000102.01	Anti-loss washer, tapered one side - PA natural - R 1/2”	21,5	M20	27,6	4,2	2,1	1/2"

1 pages - 1