ProductsAnti vibration mounts and rubber bushingsCylindrical bobbin mountsAnti-vibration bobbin mount type A - cylindrical

Anti-vibration bobbin mount type A - cylindrical

Anti-vibration bobbin mount type A - cylindricaldrawing_1

Product information

Cylindrical rubber-metal anti-vibration bobbin mounts type A are available in diameters from Ø 6 mm to Ø 200 mm inclusive, and in heights from 5 mm to 100 mm inclusive
Threaded studs on both sides (male thread) - Thread sizes (metric) from M3 to M24 inclusive, in various stud lengths
Suitable for temperatures from -30 °C to +80 °C
Generally used to reduce vibration and noise levels in motors, compressors, fans, pumps and control cabinets

Material: Rubber parts: NR (natural rubber) Shore A 55° ±5% (medium hard), Metal parts - galvanised steel (St37) or stainless steel AISI 304 (A2)

Available on request:

Different Shore hardness
Rubber parts in SBR, NBR, CR, SI or EPDM
Different thread lengths
Metal parts in stainless steel

Legend
D=diameter, H=height, l=length of thread, M=thread size, Mat. A=type of rubber, Mat. B=Material metal components, N=Maximum static load in Newton, Shore A °=Shore-A hardness of the rubber

Filter by

Show all filters

Show less filters

Reset all filters

Articles

3 pages - « Previous 1 2 3

Article	Description	H	D	l	M	Shore A °	Material B	Material A
22.A100X100M16X41	Vibration damper with two threaded bolts type A D100 H100 2X M16X41 S55	100	100	41	M16	55° ±5	St, 37	NR
22.A150X60M16X41	Vibration damper with two threaded bolts type A D150 H60 2X M16X41 S55	60	150	41	M16	55° ±5	St, 37	NR
22.A150X75M16X41	Vibration damper with two threaded bolts type A D150 H75 2X M16X41 S55	75	150	41	M16	55° ±5	St, 37	NR
22.A150X75M20X45	Vibration damper with two threaded bolts type A D150 H75 2X M20X45 S55	75	150	45	M20	55° ±5	St, 37	NR
22.A200X100M20X45	Vibration damper with two threaded bolts type A D200 H100 2X M20X45 S55	100	200	45	M20	55° ±5	St, 37	NR