ProductsAnti vibration mounts and rubber bushingsBump stops - various typesAnti-vibration mount type KN-D (impact buffer) - tapered

Anti-vibration mount type KN-D (impact buffer) - tapered

Anti-vibration mount type KN-D (impact buffer) - tapereddrawing_1

Product information

Tapered rubber-metal buffer mounts type KN-D are available in diameters from Ø 15 mm to Ø 125 mm inclusive, and in heights from 11 mm to 50 mm inclusive
Threaded stud on one side (male thread)
Thread sizes (metric) from M5 to M16 inclusive, in various stud lengths
Suitable for temperatures from -30 °C to +80 °C
Axial damping
The tapered low profile shape results in a gentle cushioning force initially, which progressively increases as the stop is compressed further or subjected to further load
Tapered rubber buffer stops are suitable for use as an elastic stroke limiter, e.g. to limit the movement of a spring, or to cushion an impact force.

Material: Rubber parts - NR (natural rubber) Shore A 55° ± 5% (medium hard) Metal parts - galvanized steel (St37) or stainless steel AISI 304 (A2)

Available on request:

Different Shore hardness
Rubber parts in SBR, NBR, CR, SI or EPDM
Different thread lengths
Metal parts in stainless steel

Legend
•=Standard product, •=Available subject to minimum order quantity, D=large Ø, H=height, l=thread length, M=thread size, Mat. A=type of rubber, Mat. B=Material metal components, N=Maximum static load in Newton, Shore A °=Shore-A hardness of the rubber

Filter by

Show all filters

Show less filters

Reset all filters

No articles found in current selection.