ProductsAnti vibration mounts and rubber bushingsBump stops - various typesAnti-vibration mount type KP-D (impact buffer) - parabolic

Anti-vibration mount type KP-D (impact buffer) - parabolic

Anti-vibration mount type KP-D (impact buffer) - parabolicdrawing_1

Product information

Parabolic rubber-metal buffer stops type KP-D are available in diameters from Ø 10 mm to Ø 118 mm inclusive, and in heights from 10 mm to 89 mm inclusive
Threaded stud on one side (male thread)
Thread sizes (metric) from M5 to M16 inclusive, in various stud lengths
Suitable for temperatures from -30 °C to +80 °C
Axial damping
The parabolic shape results in a gentle cushioning force initially, which progressively increases with further compression and/or loading
Parabolic rubber cushioning stops are suitable for use as an elastic stroke limiter, e.g. to limit the movement of a spring, or to cushion an impact force.

Material: Rubber parts - NR (natural rubber) Shore A 55° ±5% (medium hard), Metal parts - galvanised steel (St37) or stainless steel AISI 304 (A2)

Available on request:

Different Shore hardness
Rubber parts in SBR, NBR, CR, SI or EPDM
Different thread lengths
Metal parts in stainless steel

Legend
D=large Ø, H=height, l=thread length, M=thread size, Mat. A=type of rubber, Mat. B=Material metal components, N=Maximum static load in Newton, Shore A °=Shore-A hardness of the rubber

Filter by

Show all filters

Show less filters

Reset all filters

No articles found in current selection.