ProductsProtecting, masking and sealingThread and bore protectionProtective plugs – tapered

Protective plugs – tapered

Product information

Tapered protective plugs with a shoulder for round holes, tube ends, internal and external threads are available for hole sizes from Ø 4.4 mm to Ø 102.5 mm inclusive or for tapped hole sizes from M6 to M50 inclusive
Also suitable for many other types of thread like Metric fine of coarse, BSP, BSF, BSW (Witworth), UNC, UNF
Available in signal colours yellow to increase recognition and retrievability
Tapered shaft to ensure a good fit and good retention - Suitable for cheaply, easily and quickly sealing, capping or protecting blind or clearance holes, tapped holes, internal threads, ANSI tubes, hydraulic and pneumatic fittings, etc. Often used for protection during transport or grit blasting, painting or galvanising processes.

Material: LDPE (low-density polyethylene)
Colour: natural, yellow (RAL 1016) or red

Make your selection below

Legend
DIN13=Metric with rough/fine pitch, DIN 259=Withworth thread, M=Metric with normal pitch, h=Shaft height external, h1=Shaft height internal, d=Shaft-Ø, d1&d2=Shaft-Ø external, d3&d4=Shaft-Ø internal, D=Shoulder/flange-Ø

Filter by

Show all filters

Show less filters

Reset all filters

Articles

8 pages - « Previous 2 3 4 5 6 7 8 Next »

Article	Description	d1	d2	d4	d3	D	h	DIN 13	M	DIN 259	h1	MOQ	Colour/RAL	Material A
CHK0408	Conical plugs for 40.8-44.7mm - red	40,8	44,7	41,8	37,7	49	24						Red	LDPE
CHK0414	Conical plugs for 41.4-44.8mm - red	41,4	44,8	43	39,7	49,2	19						Red	LDPE
CHK0441	Conical plugs for 44.1-46.7mm - red	44,1	46,7	45,7	42,8	49,8	18,4						Red	LDPE
CHK0425	Conical plugs for 42.5-44.8mm - red	42,5	44,8	43	40,7	50,7	12,6						Red	LDPE
CHK0459	Conical plugs for 45.9-46.3mm - red	45,9	46,3	45	44,3	50,8	9,5						Red	LDPE
CH033 G	Flat plugs for internal threads and bores M50 x 3 - yellow	44,3	46,9			51	19	M50x3	M52	G 1 1/2"			Yellow	LDPE
CH033	Flat plugs for internal threads and bores M50 x 3 - natural	44,3	46,9			51	19	M50x3	M52	G 1 1/2"			Natural	LDPE
CHK0444	Conical plugs for 44.4-47.7mm - red	44,4	47,7	46,1	42,8	51	19						Red	LDPE
CHS0462	Tapered plug and cap - PE-LD - outside Ø43.8-46.2mm - flange Ø51.0mm - h=19mm - Red	43,8	46,2	44,9	42,3	51	19				0	0	Red	LDPE
CHJ0468	Conical plugs for 44,0 - 46,8 - red	44	46,8	45	42,5	51,5	19,5				0		Red	LDPE
CHS0483	Tapered plug and cap - PE-LD - outside Ø46.6-48.3mm - flange Ø53.0mm - h=19mm - Red	46,6	48,3	47	45,8	53	19				0	0	Red	LDPE
CHK0434	Conical plugs for 43.4-48.5mm - red	43,4	48,5	47	42	53,3	24,5						Red	LDPE
CHK0452	Conical plugs for 45.2-49mm - red	45,2	49	47	43,7	53,4	24,5						Red	LDPE
CHJ0497	Conical plugs for 47,2 - 49,7 - red	47,2	49,7	48,1	45,7	54	19				0		Red	LDPE
CHS0495	Tapered plug and cap - PE-LD - outside Ø47.3-49.5mm - flange Ø54.0mm - h=19mm - Red	47,3	49,5	48,1	45,7	54	19				0	0	Red	LDPE
CHK0460	Conical plugs for 46-50mm - red	46	50	48	44,3	54	24,8						Red	LDPE
CHK0475	Conical plugs for 47.5-50.3mm - red	47,5	50,3	49	45,2	54	25						Red	LDPE
CH0505	Flat plugs for internal threads and bores 50,5-53,3 - natural	50,5	53,3	51,3	48,8	55	14	M50x1 / 1,5 / 2 / 3 / 4			14,2		Natural	LDPE
CHK0486	Conical plugs for 48.6-51.2mm - red	48,6	51,2	48,9	46,7	55,5	18,7						Red	LDPE
CHK0472	Conical plugs for 47.2-51.9mm - red	47,2	51,9	48,7	44,5	55,8	24						Red	LDPE
CH0498 B	Flat plugs for internal threads and bores 49,8-51,6 - blue	49,8	51,6	48,5	46,1	56	13,5	M52x1 / M52x3 / M55x4		1 1/2"	13,3		Blue	LDPE-PCR
CHJ0515	Conical plugs for 50 - 51,5 - red	50	51,5	51	47,6	56	19				0		Red	LDPE
CHS0514	Tapered plug and cap - PE-LD - outside Ø49.3-51.4mm - flange Ø56.0mm - h=19mm - Red	49,3	51,4	50	47,6	56	19				0	0	Red	LDPE
CHK0511	Conical plugs for 51.1-54.4mm - red	51,1	54,4	52	47,7	57	25						Red	LDPE
CHK0480	Conical plugs for 48-52.7mm - red	48	52,7	50,7	46,3	57,1	25,4						Red	LDPE
CH0525	Flat plugs for internal threads and bores 52,5-54,9 - natural	52,5	54,9	52,5	50,6	58	13,5	M50x1 / 1,5 / 2 / 3 / 4			13,5		Natural	LDPE
CHK0498	Conical plugs for 49.8-54mm - red	49,8	54	52	47,5	58	24,3						Red	LDPE
CHK0515	Conical plugs for 51.5-54.1mm - red	51,5	54,1	52	49,6	58,3	18,5						Red	LDPE
CHS0563	Tapered plug and cap - PE-LD - outside Ø52.7-56.3mm - flange Ø59.3mm - h=20mm - Red	52,7	56,3	54,7	51,1	59,3	20				0	0	Red	LDPE
CHS0562	Tapered plug and cap - PE-LD - outside Ø50.7-56.2mm - flange Ø59.3mm - h=32mm - Red	50,7	56,2	54,7	49,2	59,3	31,5				0	0	Red	LDPE
CHJ0544	Conical plugs for 51,6 - 54,4 - red	51,6	54,4	52,2	50,1	59,5	19				0		Red	LDPE
CH0545 B	Flat plugs for internal threads and bores 54,5-56,2 - blue	54,5	56,2	54	51,6	60	13,5	M60x4	M60		13,5		Blue	LDPE-PCR
CHR033	Flat plugs for internal threads and bores M50 x 3 - yellow	44,3	46,9			60	19	M50x3					Yellow	LDPE
CHS0541	Tapered plug and cap - PE-LD - outside Ø50.9-54.1mm - flange Ø60.0mm - h=20mm - Red	50,9	54,1	52,6	49,4	60	20				0	0	Red	LDPE
CHJ0568	Conical plugs for 53,4 - 56,8 - red	53,4	56,8	55,5	53	61	20				0		Red	LDPE
CHJ0575	Conical plugs for 55,0 - 57,5 - red	55	57,5	56,5	54	62	20				0		Red	LDPE
CHK0540	Conical plugs for 54-58.4mm - red	54	58,4	55	50,8	62,4	24,5						Red	LDPE
CHK0535	Conical plugs for 53.5-57mm - red	53,5	57	55,3	51,2	62,4	25,1						Red	LDPE
CH0570 B	Flat plugs for internal threads and bores 57,0-59,0 - blue	57	59	56,8	54,5	63	13,4	M60x1,5 / M60x2 / M62x4			13,5		Blue	LDPE-PCR
CHK0575	Conical plugs for 57.5-57.6mm - red	57,5	57,6	56,1	55,2	63,6	12,8						Red	LDPE
CHS0581	Tapered plug and cap - PE-LD - outside Ø55.7-58.1mm - flange Ø63.7mm - h=20mm - Red	55,7	58,1	56,7	54	63,7	20				0	0	Red	LDPE
CH0585 B	Flat plugs for internal threads and bores 58,5-60,8 - blue	58,5	60,8	58	55,6	64	13,5	M62x2 / M64x4	M64		13,5		Blue	LDPE-PCR
CHS0599	Tapered plug and cap - PE-LD - outside Ø57.3-59.9mm - flange Ø64.0mm - h=20mm - Red	57,3	59,9	58,1	55,7	64	20				0	0	Red	LDPE
CHJ0624	Conical plugs for 59,5 - 62,4 - red	59,5	62,4	61,5	58,5	65	20				0		Red	LDPE
CHK0550	Conical plugs for 55-61mm - red	55	61	59	52,2	65	25						Red	LDPE
CHK0554	Conical plugs for 55.4-58.8mm - red	55,4	58,8	57,2	53,7	65	25,1						Red	LDPE
CH0605 B	Flat plugs for internal threads and bores 60,5-63,0 - bleu	60,5	63	60	57,6	66	13,5	M64x2 / M65x3	M68		14		Blue	LDPE-PCR
CHS0625	Tapered plug and cap - PE-LD - outside Ø59.6-62.5mm - flange Ø66.0mm - h=20mm - Red	59,6	62,5	61	58,5	66	20				0	0	Red	LDPE
CHK0596	Conical plugs for 59.6-62.6mm - red	59,6	62,6	61	57	66,7	24,6						Red	LDPE
CHS0630	Tapered plug and cap - PE-LD - outside Ø59.6-63.0mm - flange Ø68.5mm - h=20mm - Red	59,6	63	61,5	58,5	68,5	20				0	0	Red	LDPE

8 pages - « Previous 2 3 4 5 6 7 8 Next »

Protective plugs – tapered

VERPAS B.V.

ABOUT VERPAS

SERVICE

ORDER INFORMATION