7.2.10
Levellingfoot with ball joint - solid base - stainless steel
Product information
- Stainless steel levelling feet with ball joint and a solid stainless steel base with anti-slip sole are available with stainless steel threaded stems, thread size M6 to M36 inclusive, and thread lengths from 25 mm to 250 mm inclusive
- Solid stainless steel base Ø 30 mm to Ø160mm inclusive
- Maximum static and vertical load capacity of 500 kg to 8000 kg inclusive
- The threaded stem features either a hexagon or two flats to allow adjustment with an open-ended spanner
- Maximum angle of inclination +/- 15°
- These fully stainless steel levelling feet are suitable for use under machines, frames, conveyors, etc. where demanding requirements apply relative to stability and load-bearing capacity.
Material: Metal parts - stainless steel AISI 304 (A2), Anti-slip base – NBR (nitrile butadiene rubber) Shore A 70°
Colour: Metal parts – stainless steel-coloured, Anti-slip base - black
Important notice:
The mentioned load values have to be considered referring to static conditions calculated at the half of the screw length. Should vibrations or dynamic loads be applicable, then the mentioned values need to be reduced.
Legend
D=Base-Ø, H=Total height excluding anti-slip sole, h=Height, H1=Total height, h1=Base height, K=Maximum static load in kg, L=thread length, M=thread size, SW=Spanner size, W=Angle in °
