5.1.5
Bolt and nut protection caps - telescopic
Product information
- Telescopic nut caps are available for M14 to M90 inclusive, or for UNC ½” to UNC 3 ¼”, and in heights of 40 mm to 294 mm inclusive
- Suitable for spanner sizes from 22 mm to 130 mm inclusive
- Extra height for complete thread protection (telescopic/variable)
- Resistant to UV radiation - (organic) acids, oil, fats, seawater, etc.
- Sealing lip on the base prevents water ingress (also via capillary action) and the resulting corrosion
- Caps for neatly finishing and protecting nuts, bolts and and the ends of threaded rod in fabrications, road and water construction and the offshore sector
Material: LDPE (low-density polyethylene)
Colour: black and grey
Available on request:
- Model with protection for washers to DIN 125/126 (DIN ISO 7090/7091)
- Highly effective preservative grease for use with nut caps - Different RAL colours
Legend
D=outside Ø, H=total internal height, H1=internal height (approximate), H2=internal height (approximate), M=metric thread size, Model.=*=not suitable for double nut arrangement, SW=open-ended spanner size, UNC=UNC thread
NB. H1 and H2 are estimated based on the separate component dimensions. As a result, the actual dimensions may differ by a few millimetres.
Filter by
